Ireland classifieds

Get Website Traffic

admin — Fri, 23 Mar 2012 03:21:56 +0000

Get unique and real website visitors on very affordable prices. Buy website traffic for your website.

http://trafficlet.com/

Car glass protective polish (200ml set)

admin — Thu, 22 Mar 2012 09:16:35 +0000

All weather, environmentally friendly waterless nanoprotect and polish product for automobile window glass, headlights and mirrors. Better glass optical properties and safer driving. Treated surfaces are self-cleaning, water and muck repellent. Easily coated and polished, a strong protective layer is created which prevents strong ice coating on glass in winter. Factory nanoFormula sells Car.Glass and other environmentally friendly products in internet shop. For wholesale purchases (1 pallet and more) contact with us.

Ultrasonic wall thickness gauge CT-4041

admin — Thu, 15 Mar 2012 08:36:32 +0000

FEATURES
* Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement .
* With high power of emission and broad band of receiving sensitivity, the gauge can match probes of different frequencies. That makes it easy to measure the rough surface, even cast iron. It is widely used in almost all kinds of industries.
* Applicable to measure the thickness of many materials, e. g. Steel, Cast iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron.

SPECIFICATIONS
Display: 4 digits, 10 mm LCD
Range: 1.0~200mm (45# steel )
Resolution: 0.1 mm/0.001inch
Accuracy: ±(0.5%n+0.1）
Sound velocity: 500 ~9000 m/s
Power supply: 4×1.5V AAA (UM-4) battery
Operating condition:
Temp. 0~40℃
Humidity

Surface roughness tester CR-4032

admin — Thu, 15 Mar 2012 08:36:21 +0000

1.FEATURES
This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. When measuring the roughness of a surface, the
sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate
analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

SPECIFICATIONS
Display： 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz, Rq, Rt
Display Range
Ra, Rq: 0.025-16.00um/1.000-1600uinch
Rz, Rt: 0.020-160.0um/0.780-9999uinch
Accuracy: Not more than ±10%
Fluctuation of display value: Not more than 6%
Sensor :
Test Principle: Inductance type
Radius of Probe Pin: 5um (default) 2µm
Material of Probe Pin: Diamond
Measurement Force of Probe:
4mN(0.4gf) for 5um stylus
0.75mN(0.075gf) for 2um stylus
Probe Angle: 90°
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Driving speed:
Vt=0.135mm/s if sampling length = 0.25mm
Vt=0.5mm/s if sampling length = 0.8mm
Vt=1mm/s if sampling length = 2.5mm
Vt=1mm/s if returning
Profile digital filter
Filtered Profile: RC
Filtered Profile: PC-RC
Filtered Profile: Gauss
Non-Filtered Profile: D-P

Resolution : 0.001μm if reading ＜10μm
0.01μm if 10μm≤reading＜100μm
0.1μm if reading ≥100μm
Evaluation length 1~5) cut-off optional
Operating conditions: Humidity

Portable vibration meter,vibration analysis instrument CV-4061

admin — Thu, 15 Mar 2012 08:36:10 +0000

FEATURES
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
* Individual high quality accelerometer for accurate and repeatable measurements.
* Bearing condition monitoring function.

SPECIFICATIONS
Display: 4 digits, 18 mm LCD
Measured values and makers
(units, 10,and battery symbol)
Transducer :
Piezoelectric accelerometer
Parameters measured:
Velocity, Acceleration, and Displacement RPM and Frequency
Measuring range :
Velocity:
0.01-20.00 cm/s2 true RMS
0.000-16.00 inch/s2
Acceleration:
0.1-400.0m/s equivalent peak
0.3-1312 ft/s
Displacement : 0.001-4.000mm
0.04-160.0 mil , equivalent pk-pk

RPM (r/min) : 60-99,990 r/min
Readings should be multiplied by 10 if the display show ’10′.
Frequency: 1-20 kHz
Frequency range for measuring
Acceleration :
10Hz. to 1kHz. In ’1′ mode
10Hz. to 10kHz. In ’10′ mode for bearing condition check
Velocity : 10Hz. to 1kHz.
Displacement : 10Hz. to 1kHz.
Accuracy: ±5%+2 digits
Metric/ Imperial conversion
PC interface: RS232C
Output: AC output 2.0V peak full scale (load resistance: above 10k)
Power supply: 4×1.5 AAA size (UM-4) batteries
Power off : 2 modes
Manual off at any time

Operating conditions:
Temperature : 0-40 ℃
Humidity : below 90% RH
Accessories included :
Powerful rare earth magnet…1 pc.
Accelerometer……………….1 pc.
Stinger probe (Cone)……….1 pc.
Stinger probe (Ball)………..1 pc.
Carrying case………………..1 pc.
Operation manual…………..1 pc.
Optional accessories:
Headphones for use as electronic stethoscope Cable and software for RS232C

Portable leeb hardness tester CL-4051

admin — Thu, 15 Mar 2012 08:35:53 +0000

Typical Applications
* Die cavity of molds
* Inspection of bearing and other mass produced parts on a production line
* Failure analysis of pressure vessel, steam generator and other equipment
* Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces.
* Testing surface of a small hollow space
* Material identification in the warehouse of metallic materials
* Rapid testing in large range and multi-measuring areas for large-scale work piece
1.2 Testing Features
* Palm size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
* Large memory could store 250 groups including single measured value, impact direction, material and hardness scale etc.
* User recalibration function allowed.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.

Technical Specifications
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900
Measuring range: 200-900L
Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory:250 data can be stored and re-readable
Impact device: D Will handle the majority of hardness testing applications. Weight: 75g
Power supply: 4×1.5V AAA size battery
Dimension: 146×65×36mm
Weight: 130g (not including batteries)
Storage temperature：-30℃～＋60℃;
Relative humidity: ≤90％

coating thickenss gauge CC-4012

admin — Thu, 15 Mar 2012 08:35:21 +0000

FEATURES
* It meets the standards of both ISO2178 and ISO-2361as well as DIN, ASTM and BS. Suitable for the laboratory and for use in harsh field conditions.
* The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.

* The N probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

SPECIFICATIONS
Display：4 digits, 10 mm LCD
Range： 0~1000 um/0~40mil
Resolution： 0.1 um (0~99.9um)
1 um (over 100um)
Accuracy：±1~3%n or 2.5 um or 0.1mil
(Whichever is the greater)
PC interface: with RS-232C interface
RS-232C cable & software: not included
(The above are optional accessories)
Power supply： 2×1.5 AAA(UM-4) battery
Operating condition: Temp. 0~40℃, Humidity

Athy, 3 Bed House for Rent

admin — Mon, 12 Mar 2012 13:02:05 +0000

Athy, 3 Bed House
For Rent,
New to Let, Fully Furnished,
All Mod Cons, Pets Welcome.
WILL ACCEPT SOCIAL WELFARE
Ph:0868198905

Professional ecological polish and nano protect product for automobile interiors care.

admin — Tue, 28 Feb 2012 17:50:59 +0000

All weather, eco smart car detailing and nano protect product for plastic, metal and rubber parts of the interiors of transport vehicles.
Effective and eco-smart nanoprotect and polish product for car interiors, salons and dashboards cleans, protects, polishes and renews looks of plastic, metal and rubber elements. Factory nanoFormula sells Pro.Transport.Interior and other environmentally friendly products in internet shop. For wholesale purchases (1 pallet and more) contact with us.

Step 2 Well Fitness Club and Gym

admin — Tue, 28 Feb 2012 03:12:33 +0000

Step 2 well fitness club. All types of exercises like dance,
Aerobics, Stretching, Floor exercise, Weightloss, Bodyfitness
Dietplan. for more information contact us on +91-9558822035 or
mail us on step2well123@gmail.com jpr01ev2011mbg105